AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N]

Click to enlarge

Your Price:

Part Number: XM1320N
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 17.00

Download information on the AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N]

AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N]
Steambrite's XM/SXM Series - AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N].
If you can find a lower advertised price on the AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N] - XM1320N, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

chemical cleaning earth free friendly product carpet deep cleaning machine N/A host carpet cleaning machine cleaning hospital equipment air cleaning duct technique carpet cleaning machine reviewbest dehumidifier carpet cleaning equipment mounted truck N/A bidding bidding care carpet carpet cleaning cleaning cleaning equipment floor janitorsedge.ca software software supplys consumer report dehumidifier drieazcar restoration equipment N/A carpet cleaning equipment mount truck portable carpet extractor N/A ninja carpet cleaning machine mytee carpet extractorcarpet cleaning equipment air duct industrial carpet cleaning machine steam cleaning equipment supply cleaning equipment tube hornet truckmount N/A basement dehumidifier comparison N/A best dehumidifier truck mounted carpet cleaning equipment

AR Pump XM1320N Pump: 3.5/2500 1450RPM

Description

The Annovi Reverberi XM1320N, N version 24mm solid shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XM1320N can produce up to 2500 Max PSI, 3.5 Max GPM, and is designed to operate at 1450 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XM1320N weighs in at 14 lbs and boasts a sleek compact design.

Features

Manifold:
- Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
- Ultra Form Cages: Durability, strength and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Machined brass – greater strength.
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
- Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N]
Steambrite's XM/SXM Series - AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N] is .
If you can find a lower advertised price on the AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N] - XM1320N,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

windsor carpet extractor agent chemical cleaning toiletries N/A air conditioner and dehumidifier santa fe dehumidifier dessicant dehumidifier carpet upholstery extractor automotive carpet extractor tank cleaning equipment N/A air clean duct equipment sale small dehumidifier 40 pint dehumidifier carpet extractor self N/A authorized chemical cleaning organic run grain cleaning equipment N/A air duct cleaning equipment air duct cleaning tool carpet cleaning equipment truckmounted commercial carpet cleaning equipment ninja carpet cleaning machine chemical cleaning dry carpet cleaning supply 1 professional carpet cleaning equipment N/A carpet extractor part N/A air duct cleaning orange county carpet and rug cleaning equipment and supply

Product Options

This product was added to our store on Wednesday 02 October, 2024.

Steambrite will ship the AR Pump XM1320N Pump: 3.5/2500 1450RPM [XM1320N] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.