Kohler PA-ECV749-3046 26.5hp EFI Command Pro Vertical Air Cooled Gasoline Engine Exmark
HD Air Cleaner
Shaft 1.125 X 4.3
Wire Harness 24176258
No Key Switch
Durable, Long Life Design.
Hydraulic valve lifters are oil pressurized, ensuring that push rods stay in constant contact with the rocker arms. Requiring no adjustment, the valve train is virtually maintenance-free. In addition, full-pressure lubrication delivers continuous lube to critical engine components, even at 25-degree angle of operation and optional oil cooler regulates the oil temperature extending oil-change intervals. Large capacity, in-line fuel filter provides extra protection against dirt particles that can clog fuel lines.
High Power Performance.
Overhead valve technology provides greater volumetric efficiency and a higher compression ratio. This produces more power, improved fuel economy and cooling and reduces oil consumption. In addition, there is virtually no carbon buildup, reducing overall maintenance costs. The variable speed, mechanical governor promises smooth performance, regardless of application or fluctuating demands for power.
Reliable Starting.
Kohler Command PRO® electronic ignition system generates a stronger spark at low cranking speed.
Easy Dependable Starts.
- Optimized fuel injector placement and intelligent sensor pack deliver fuel wherever and whenever there is a demand for power
- No-choke starting even in cold weather, when engine is hot or after long periods of storage
- Less downtime and less maintenance for the life of the engine
- No messy, gummed-up carburetor to clean or adjust
Increased Efficiency.
- Capable of saving up to 25% in fuel over similar-size carbureted engines
- Advanced oxygen sensor analyzes the exhaust's air/fuel mixture
- Upon analysis, the oxygen sensor adjusts the air/fuel mixture for optimum fuel efficiency
- On top of the savings, you'll also refuel less, increasing your overall efficiency
Lowest Operating Cost.
- Fast payback for your investment
MODEL BENEFITS
Highest Productivity, Lowest Operating Cost
The Kohler closed-loop EFI system provides easier starts, better load response, more power and up to 25% better fuel economy. With fuel savings alone, the system will pay for itself in less than one year.
Reduced Carbon Footprint
Using up to 25% less fuel than industry-equivalent carbureted models, Kohler's closed-loop EFI reduces emissions by burning less fuel more efficiently.
User friendly EFI diagnostic software
The Kohler EFI Diagnostic Software resolves engine issues with minimal user effort, just like automotive software at your car dealer, keeping your engines in the field and productivity off the charts.
No Carburetor
No carburetor problems, no required choke, and never clean or adjust a carburetor again. Plus, KOHLER EFI means your KOHLER engine will perform the same from day one to the end of it's product life.
Three-year Commercial Warranty
Kohler stands behind its Closed-Loop EFI Engine with a
three-year unlimited hour commercial warranty.
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• Heavy Duty Canister Air Cleaner System (Kohler)
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Fill Tube and Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™
• Variable Speed Governor
• Pulse Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• Crankshaft-1"(25.4 mm) Diameter x 3.16" (80 mm) PTO Length, 0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-10" (254 mm) Diameter, 4 through holes, 0.36” (9 mm) Diameter
• Color-Black with Cast Aluminum
• Special Chopper Grass Screen and Fixed Guard
• 20 Amp Alternator, Regulated
• 3/16” Evaporative emissions connection
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0" (102 mm) PTO Length, 0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• No Exhaust System-Studs, Nuts, and Gaskets only
• Oxygen sensor
Engine Type:
4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block, electronic fuel injection
| Max Power @3600 RPM hp (kW) 1 |
29 (21.6) |
| Displacement cu in (cc) |
45 (747) |
| Bore in (mm) |
3.3 (83) |
| Stroke in (mm) |
2.7 (69) |
| Max Torque lbs. ft (Nm)1 |
44.2 (59.9) |
| Compression Ratio |
9.1:1 |
| Dry Weight lbs (kg) |
108 (49) |
| Oil Capacity U.S. quarts (L) |
2 (1.9) |
| Lubrication |
Full pressure w/full-flow filter |
| Dimensions L x W x H in |
21.3 x 18.5 x 17.6 |
| Backpressure Limit 2 |
50 |
| J1995 Power hp (kW) 3 |
25.3 (18.9) |
| J1995 Torque lbs ft (Nm) 3 |
38.7 (52.5) |
Owners Manual
Service Manual
Videos and Demos
|
