.jpg)
This can be used an exact drop in replacement for Dresser Roots URAI #36 vacuum blower (same footprint, same dimensions, same port openings). Shaft diameter is 7/8".
Ship Weight: 133#
Machine Weight: 113#
Ship Dimensions:
25x21x26H
2-1/2" Fip connections for air on both sides
Can be spun in either direction.
Applications:
- Carpet Cleaning Prochem Truckmount 86316450 and shown above on the Sapphire Scientific Rage
- Dairy Milking
- Mosquito Fogging
- Wastewater Aeration
- Trenchless Drilling
- Air Sparging
- Compost Aeration
- Vacuum Cleaning
- Dust Collection
Features:
- Gears: Helical gearing for quiet operation
- Bearings:
- Gear End: Double row ball
- Drive Shaft: Cylindrical roller
- Rotors: Ductile iron, integrally cast with shafts
- Lubrication:
- Gear End: Oil splash
- Drive End: Grease
- Seals: Lip
- Low noise option available on most models
- Flow range: 6 - 2300 CFM (10 - 3900 m³/h)
- Pressure range: up to 15 PSIG (1.03 bar g)
- Vacuum range: up to 16" Hg (540 mbar g)
- Every unit tested before shipment
- Field and troubleshooting guide
-
- Model 3006 Performance Curves
- Rotary Positive Gas Blowers
-
- Tuthill Blower Brochure
Designed with features found ordinarily on high-end
blowers, COMPETITOR GT blowers are still designed to be
interchangeable, with respect to foot print, shaft height and
diameter, with equivalent sizes of Roots Universal RAI-G®, and
many Sutorbilt® California Series Legend™ Series L and P, as
well as M-D Pneumatics COMPETITOR PLUS™ blowers.
Splash Oil Lubrication at One End
COMPETITOR GT blowers include splash oil lubrication at gear side and grease on shaft side.
Helical Gearing
COMPETITOR GT blowers are timed with hardened, precision
helical gears, keyed to the rotor shafts, not taper fit spur gears
offered by other manufacturers which have greater backlash,
and can slip and lose timing. Helical gears are also quieter,
further reducing mechanical noise.
Stronger Bearings
All COMPETITOR GT blowers include double row ball bearings
at the gear end, stronger than single row ball bearings offered by
other manufacturers. Drive shaft bearing is cylindrical roller type
for additional strength against side loading from V-belt drives.
As a result of this superior design, COMPETITOR GT blowers
offer significantly longer bearing life than models offered by
other manufacturers.
Rotors with Integral Shafts
COMPETITOR GT blowers include precision machined ductile
iron rotors with large, integrally cast shafts, not press fit and/or
pinned shafts offered by other manufacturers, which can loosen
over time and cause rotor clash. All rotors are dynamically
balanced for vibration-free rotation.
Model sizes 3002, 3003, and 3006 are supplied with a 7/8" diameter drive shaft. when replacing equivalent Roots or Sutorbilt models, the Competitor models require larger bore on the blower sheave bushing or coupling half from smaller 3/4" drive shaft of equivalents Roots or Sutorbit model replaced.
Positive End Clearances
End clearances are positively established at the blower gear end,
eliminating the risk of shifting end clearances when installing or
removing drive components. This also eliminates the need for
those special fork and saddle tools required by other brands to
reset end clearances.
Polished Drive Shaft Sealing Surfaces
Driveshaft is polished to reduce seal wear and risk of leakage.
The factory does not paint the blower.
They only apply a light primer spray to slow down rusting.
When you open the box all new blowers are rusted.
If you want us to take the blower out of the box and paint it, please let us know and we can do this for an extra fee.
Important Option
.
Factory Installed on:
Tuthill 3006-21L2 Competitor Blower Left Shaft Drop in replacement for Roots 36 RUI A6L2CV1-A [3006-21L2]
Steambrite's Blowers and Vacuum Pumps - Tuthill 3006-21L2 Competitor Blower Left Shaft Drop in replacement for Roots 36 RUI A6L2CV1-A [3006-21L2] is .
If you can find a lower advertised price on the Tuthill 3006-21L2 Competitor Blower Left Shaft Drop in replacement for Roots 36 RUI A6L2CV1-A [3006-21L2] - 3006-21L2,contact us at 210-662-9000,
and we will beat their price! Guaranteed!
home air duct cleaning box carpet extractor N/A mold carpet extractor self whole house dehumidifier carpet cleaning supply and machine
ads carpet classifieds cleaning equipment free janitorsedge.ca air cleaning duct services toronto N/A whole house dehumidifier carpet cleaners cleaning machine steam carpet cleaning equipment uk
dehumidifier work N/A air duct cleaning chicago office cleaning equipment N/A used carpet extractor air cleaning duct equipment used
soleus dehumidifier small dehumidifier carpet cleaning extractor machine dehumidifier part roto brush carpet cleaning machine wholesale N/A carpet rug cleaning equipment supply wholesale N/A dry foam carpet cleaning machine carpet cleaning machine manufacturer
| Product Options |
| Shipping Surcharges: |
|
|
