AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N]

Click to enlarge

Your Price:

Part Number: XMA4G20N
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 17.00

Download information on the AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N]

AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N]
Steambrite's XM/SXM Series - AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N].
If you can find a lower advertised price on the AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N] - XMA4G20N, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

residential carpet cleaning machine car chemical cleaning ireland N/A houston air duct cleaning carpet cleaning dry equipment santa fe dehumidifier air ducthome carpet steam cleaning machine quiet dehumidifier N/A air duct cleaning dallas carpet extractor part hunter dehumidifiersmall carpet cleaning machine N/A carpet cleaning equipment truckmount carpet extractor for sale N/A janitorial cleaning equipment air cleaning duct equipment usedchemical cleaning roof hoover carpet cleaning machine carpet cleaning equipment mount truck used box carpet extractor truck mount carpet cleaning machine cleaning chemical N/A oasis dehumidifier N/A commercial dehumidifier carpet cleaning equipment manufacturer

AR Pump XMA4G20N Pump: 4/2000 1750RPM

Description

The Annovi Reverberi XMA4G20N, N version 24mm solid shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA4G20N can produce up to 2000 Max PSI, 4 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA4G20N weighs in at 14 lbs and boasts a sleek compact design.

Features

Manifold:
Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps: Machined brass – greater strength.
Packing and Plungers:
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings:
Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods:
Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Specifications

Weight	14 lbs.
Pump Orientation	Horizontal
Pump Head Material	Brass
Connecting Rods	Aluminum
Max GPM	4
Max L/Min	15.1
Max PSI	2000
Max Bar	140
Power EBHP	5.5
Bore Dia. (mm)	18
Stroke (mm)	13.2
CSID Stamp	3
Inlet (in)	1/2” F
Outlet (in)	3/8” F
Max Temp	140° F
Oil Capacity (oz.)	14.5
RPM	1750
Shaft Size	24mm
Shaft Version	Neutral Shaft
Shaft Type	Solid
Market	Commercial
Pump Type	Tri-Plex Plunger

AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N]
Steambrite's XM/SXM Series - AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N] is .
If you can find a lower advertised price on the AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N] - XMA4G20N,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

safe dehumidifier coupon.blogspot.com dehumidifier link N/A box carpet extractor air cleaning duct ebay equipment air duct cleaning cost mold remediation carpet cleaning equipment uk air conditioning duct cleaning N/A wholesale carpet cleaning equipment commercial carpet cleaning machine air conditioning equipment system cleaning carpet and rug cleaning equipment and supply N/A carpet cleaning equipment rental dry carpet cleaning machine N/A carpet cleaning equipment industrial bathroom dehumidifier carpet cleaning equipment manufacturer chemical cleaning pool amcor dehumidifier castex carpet extractor desiccant dehumidifier dry carpet cleaning machine N/A air duct cleaning tool N/A british cleaning columbia,canada equipment el lobo truckmount

Product Options

This product was added to our store on Friday 17 July, 2015.

Steambrite will ship the AR Pump XMA4G20N Pump: 4/2000 1750RPM [XMA4G20N] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.