AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17]

Click to enlarge

Your Price:

Part Number: XMA3G30E-F17
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 18.00

Download information on the AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17]

AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17]
Steambrite's XM/SXM Series - AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17].
If you can find a lower advertised price on the AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17] - XMA3G30E-F17, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

dehumidifier filter portable extractor N/A box carpet extractor window cleaning equipment chemical cleaning compound closet dehumidifierwindsor carpet extractor carpet cleaning commercial equipment N/A water damage restoration equipment carpet cleaning machine uk car steam cleaning equipmentcleaning hospital equipment N/A chemical cleaning product dehumidifier filter N/A air duct cleaning equipment california carpet cleaning machine mount truckrv dehumidifier carpet cleaning equipment rental carpet extractor part used truck mounted carpet cleaning equipment soleus dehumidifier munters dehumidifier N/A compare carpet cleaning machine N/A used seed cleaning equipment windchaser dehumidifier

AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM

Description

The Annovi Reverberi XMA3G30E-F17, E version 1-1/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA3G30E-F17 can produce up to 3000 Max PSI, 3 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA3G30E-F17 weighs in at 15 lbs and boasts a sleek compact design.

Features

Manifold:
- Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
- Ultra Form Cages: Durability, strength and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Machined brass – greater strength.
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
- Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Specifications

Weight	15 lbs.
Pump Orientation	Horizontal
Pump Head Material	Brass
Connecting Rods	Aluminum
Max GPM	3
Max L/Min	11.4
Max PSI	3000
Max Bar	206
Power EBHP	6.2
Bore Dia. (mm)	15
Stroke (mm)	13.2
CSID Stamp	3
Inlet (in)	1/2” F
Outlet (in)	3/8” F
Max Temp	140° F
Oil Capacity (oz.)	14.5
RPM	1750
Shaft Size	1-1/8”
Shaft Version	Electric Shaft
Shaft Type	Hollow
Flange	F17
Market	Commercial
Pump Type	Tri-Plex Plunger

AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17]
Steambrite's XM/SXM Series - AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17] is .
If you can find a lower advertised price on the AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17] - XMA3G30E-F17,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

car chemical cleaning ireland dehumidifier product review N/A air conditioner and dehumidifier cleaning hospital equipment gutter cleaning equipment carpet cleaning equipment truckmount carpet cleaning equipment manufacturer dehumidifier desiccant manufacturing N/A air duct cleaning new york air cleaning duct ebay equipment carpet cleaning equipment manufacturer windchaser dehumidifier N/A carpet cleaning equipment carpet cleaning machine to buy N/A furnace dehumidifier the rug doctor carpet cleaning machine calorex dehumidifier air duct cleaning company carpet cleaning equipment mount truck used agricultural cleaning cleaning equipment equipment equipment garden generator hand home hydraulics improvement job lawn plan power portable extractor 40 cfm dehumidifier soleus N/A 40 cfm dehumidifier soleus N/A truck mount castex carpet extractor

Product Options

This product was added to our store on Friday 17 July, 2015.

Steambrite will ship the AR Pump XMA3G30E-F17 Pump: 3/3000 1750RPM [XMA3G30E-F17] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.