AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8]

Click to enlarge

Your Price:

Part Number: XJV16G17E-F8
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 15.00

Download information on the AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8]

AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8]
Steambrite's XJ Series - AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8].
If you can find a lower advertised price on the AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8] - XJV16G17E-F8, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

used truck mount carpet cleaning equipment dry foam carpet cleaning machine N/A residential carpet cleaning machine truck mount carpet extractor air duct cleaning cost air cleaning conditioning duct tampacleaning equipment pressure washer cleaning duct air system N/A used carpet extractor automotive carpet extractor air conditioner and dehumidifierninja carpet extractor N/A century 400 gun safe dehumidifier N/A dry foam carpet cleaning machine restoration equipmentlowes dehumidifier carpet cleaning machine uk castex carpet extractor carpet extractor part truckmount carpet clean equipment home dehumidifier N/A small dehumidifier N/A bidding bidding care carpet carpet cleaning cleaning cleaning equipment floor janitorsedge.ca software software supplys window cleaning equipment supply

AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM

Description

The Annovi Reverberi XJV16G17E-F8, E version 5/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XJV16G17E-F8 can produce up to 1700 Max PSI, 1.6 Max GPM, and is designed to operate at 3400 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XJV16G17E-F8 weighs in at 11 lbs and boasts a sleek compact design.

Features

Manifold:
- Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
- Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
- Bolts: Three bolts, 10mm, grade 8.8.
Valves:
- Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Machined brass for greater strength.
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
- Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
- Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8]
Steambrite's XJ Series - AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8] is .
If you can find a lower advertised price on the AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8] - XJV16G17E-F8,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

hornet truckmount carpet cleaning machine N/A used truck mounted carpet cleaning equipment carpet contained extractor aprilaire dehumidifier chemical cleaning exchanger heat carpet rug cleaning equipment supply wholesale car steam cleaning equipment N/A car chemical cleaning ireland goldstar dehumidifier crawlspace dehumidifier carpet cleaning portable supply tanks.com water N/A friedrich dehumidifier golden rod dehumidifier N/A carpet cleaning equipment rug supply wholesale carpet cleaning equipment truckmount rv dehumidifier car restoration equipment dehumidifier part cleaning and services and equipment home carpet cleaning machine air duct cleaning chicago N/A el lobo truckmount N/A 1700 aprilaire dehumidifier home model whole carpet chemical cleaning

Product Options

This product was added to our store on Tuesday 01 October, 2024.

Steambrite will ship the AR Pump XJV16G17E-F8 Pump: 1.6/1700 3400RPM [XJV16G17E-F8] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.