AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35]

Click to enlarge

Your Price:

Part Number: SXW15.35
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 32.00

Download information on the AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35]

AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35]
Steambrite's SXW series - AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35].
If you can find a lower advertised price on the AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35] - SXW15.35, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

commercial cleaning equipment whirlpool dehumidifier N/A sears dehumidifier cleaning and services and equipment thermastor hunter dehumidifierduct cleaning equipment carpet extractor N/A chimney cleaning equipment mold air cleaning discount duct houston txquiet dehumidifier N/A grain cleaning equipment amcor dehumidifier N/A tank cleaning equipment air duct cleaning new yorkhome carpet steam cleaning machine dryer vent cleaning equipment hot water carpet extraction air duct cleaning equipment truck mount carpet cleaning equipment air duct cleaning milwaukee N/A dehumidification N/A maytag dehumidifier air duct cleaning orange county

AR Pump SXW15.35 Pump: 4/5000 1450RPM

Description

The Annovi Reverberi SXW15.35, N version 24mm solid shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The SXW15.35 can produce up to 5100 Max PSI, 3.96 Max GPM, and is designed to operate at 1450 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the SXW15.35 weighs in at 35 lbs and delivers the performance you demand.

Features

Manifold:
- Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety, performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Eight bolts, 10mm, grade 8.8.
Valves:
- Ultra Form Cages: Durable, strength, and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Forged. Patented Valve Cap Design
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- Support and Guides: Machined brass, 2-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement
Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cross head for strength, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: Heavy 2-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 32 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180ºF. Refer to breakdown.
Wet End Repair: Very simple no special tools required.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Specifications

Weight	35 lbs.
Pump Orientation	Horizontal
Pump Head Material	Brass
Connecting Rods	Aluminum
Max GPM	3.96
Max L/Min	15
Max PSI	5100
Max Bar	350
Power EBHP	15
Bore Dia. (mm)	18
Stroke (mm)	15
CSID Stamp	8
Inlet (in)	1/2" F
Outlet (in)	3/8” F
Max Temp	140° F
Oil Capacity (oz.)	32
RPM	1450
Shaft Size	24mm
Shaf Version	Neutral Shaft
Shaft Type	Hollow
Market	Commercial
Pump Type	Tri-Plex Plunger

AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35]
Steambrite's SXW series - AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35] is .
If you can find a lower advertised price on the AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35] - SXW15.35,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

gun safe dehumidifier industrial vacuum cleaner N/A carpet cleaning equipment castex carpet extractor cheap dehumidifier air cleaning conditioning duct tampa delonghi dehumidifier air duct cleaning nj N/A hot water carpet extraction chemical cleaning industrial golden rod dehumidifier professional carpet cleaning equipment N/A industrial dehumidifier commercial cleaning equipment N/A lowes dehumidifier automotive carpet extractor ninja carpet cleaning machine commercial dehumidifier freshwater tank truckmount air cleaning duct equipment used buy dehumidifier carpet cleaning machine rent N/A furnace cleaning equipment N/A window cleaning equipment supply dry foam carpet cleaning machine

Product Options

This product was added to our store on Monday 03 August, 2015.

Steambrite will ship the AR Pump SXW15.35 Pump: 4/5000 1450RPM [SXW15.35] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.