Pressure Pro Stationary HOT Washer 4230SGF-20G1 Natural Gas LP 3.8gpm 2000psi 6hp 230v 1ph 25 amp General Pump

Specify either LP (liquid propane) or NG (natural gas) when ordering.

STANDARD FEATURES

• Rugged powder coated steel frame, enclosed pump/motor compartment w/ hinged lid
• Super efficient schedule 80 coil

  Factory Installed  Pressure Pro PCA750-10 Replacement Burner Coil for 2-3 Gpm Pressure Washers

• Stainless steel coil wrapper,

  Factory Installed  Pressure Pro Stainless Coil Wrap PCA750-6 Fits Hot Shot Vertical 2-3 GPM Models

• Control panel,
• Float tank

  Factory Installed  Pressure Pro Float Tank Assembly YFLOATTANK 1.05 gallons

• Robert Shaw LP/NG electronic ignition 24 volt controls

  Factory Installed  Robertshaw Natural Gas and Propane Valve

• Commercial/Industrial grade motors

  Factory Installed  Marathon Electric 6 HP Motor 1800 RPM 1 Ph 184TC 208-230 Volt 28.5/25.5 Amp 85 lbs 184TBDR17031

• Low speed V-belt driven General pump

  Factory Installed  General Pump HTXS1812S Emperor Run 3.2/3.8gpm 2000psi 1450/1750rpm High Temperature or similar

• High limit over temp protection

  Factory Installed 225 Degree Switch Sensor 1/2" Mip with 3 Wire Leads  Controls water temperature.

• Vacuum switch

  Factory Installed  Mecline Vacuum Switch MVVS2.5  Used to control solenoids, Relays, and Low and No water safety switches.

• Safety pressure relief valve

  Factory Installed  Pressure Pro 22533A-4600 5000psi 3/8Mip 6 gpm 140 degree Pressure Relief Valve  Protects coil from over pressurization.

• 10′ power cord (no plug)

NOTE: All units are completely factory assembled, tested in the USA, and delivered ready to operate.
 

STANDARD ACCESSORIES

• Gun/wand assembly with insulated grip and quick connects

  Factory Provided  Pressure Pro AGUD3621290C Washer Lance and Gun Combo 4060 psi Insulated Grip 36 in w Couplers

• 50′ high pressure hose w/quick connects

  Factory Provided Pressure Pro AHS330 Double Wire 50 ft Washer Hose 3/8 In 6000psi With Couplers Installed Black

• Maxi-Flo 20% chemical injector assembly w/quick connects

  Factory Provided  Pressure Pro ACI005 General Pump 100775 Maxi-Flow Fixed 20% Chemical Injector 3-5 gpm

• 4 color-coded QC spray nozzles

  Factory Provided  Pressure Washing Nozzles, and Repair Parts

• 1 color-coded QC chemical soap injection nozzle

General pump Maintenance Guide

Owners Manual

Factory Warranty

Factory Brochure

Cleaning Units/Speed: 15,200

AVAILABLE OPTIONS

• 98-010 Panel Mount Thermostat $100

  General Pump 100538 Dial Thermostat 86 - 250 Degrees F. 781999 Parts plus labor to be added

• 98-011 Hour Meter 

  Factory Installed  Digital Hour Meter 120 Volts, El 24-277 Ac/Dc 50/60 Hz - 8.749-316.0  Perfect for oil changes and descaler intervals

• 98-101 10˝ Draft Diverter $185.83
• 98-102 Soap Solenoid w/ Panel Mount Switch $106.56
• 98-104 Time-delay Shutdown w/ Adjustable Timer  $308.00
• 98-105 Single Remote Station w/ Start/Stop/Burner $201.86
• 98-106 Multi Remote Stations w/ Start/Stop/Burner/Soap $344.82
• 98-107 Add’l Remote Stations $265.12
• 98-108 Oil Fired Option $238.69

  Optional Factory installed Beckett 240 Volt AFG Oil Burner 8.709-326.0 Pressure Pro301 VMG202

• 98-130 By-Pass Thermal Shutdown $89.66
• 98-510 18/5 Cable, Single Remote Station $1.16 per ft
• 98-512 18/7 Cable, Multi Remote Stations  $1.39 per ft
• General Pump Oil

  General Pump Oil Case 24 units  Required at 50 hours and then every 200 hours

• Decaler

  Shazaam: Descaler System Maintainer - 1 Gallon

All Stainless Steel Frame Models Available – consult sales rep