

1" NPT X 1" Barbed Brass straight
Product specs
- Temperature and Working Pressure Ranges: From -400F to + 1600F at 150 PSI maximum.
- Tolerance: +/- .02 on all dimensions. Dimension Data can change without notice. Please call us when dimensions are critical.
- Material: CA360 Brass for Barstock fittings. CA377 Brass for Forged fittings.
Note: These fittings are intended for use with hose clamp,
similar type clamp or a crimped ferrule.
1- Cut hose cleanly and squarely to length.
2- Slide clamp on hose.
3- Lubricate hose. Push hose on fitting until hose
bottoms against stop ring or hex.
4- Position hose clamp as shown below and secure
with a screwdriver or wrench. Maintain “A”
dimension noted below for proper clamp positioning.
Also marketed under
1 X 1 HOSE BARB X MALE ADPT 32025, 32-025, Mid 32-025

|