Hypro 9202C Pedestal Pump for Truckmount Auto Dump

 features a pedestal mount, direct drive, Viton® seals, *CCW pump shaft rotation (9203C-R is CW) and a glass-filled nylon impeller with stainless steel wear ring. Maximum fluid temperature is 140 Deg. F.

Max rpm:  6000
Produces up to 180 psi
5/8" sharft
1-1/4" fip water in connection X 1" Fip water out connection.
Viton seals and glass filled nylon impeller with stainless steel wear ring.
Works with hot water up to 140 degrees F.

Can be run at a one to one speed with an engine.
Usually set on the floor and sucks water from out of a "tee" fitting on truckmount drain valve.
Can run dry without damage.
If used with a vacuum tank, install a check valve on discharge side.
Factory installed on many different models of Amtex truckmounts.
Will not self prime unless the water level is higher than the suction side port.
Compare to current or past OEM associations:
UPC

Optional Brass Check Valve 1in Fip X 1in Fip 8.709-386.0

Required and not included:  Must use some type of water filter system on inbound side of pump.   Example Mytee F200 Mytee F200 Hose Mount Lint Hog Debris Carpet Cleaning Machine Hose Filter for 2 inch vacuum hose