Sometimes customer have odor problems, so we have an odor start up kit.
Part number SMBodor.
The Odor Kit consist of:
One gallon of Pounce
http://www.steam-brite.com/store/shazaam-pounce-odor-stain-remover-p-4339.html
One gallon of Knock Out
http://www.steam-brite.com/store/shazaam-knock-gallon-p-262.html
One gallon of Clear Up
http://www.steam-brite.com/store/shazaam-clear-gallon-p-268.html
One gallon of Dual Action
http://www.steam-brite.com/store/shazaam-dual-action-deoderizer-p-9026.html


To locate pet odor, use a UV light and a hydrosensor.  Pet urine will flores with the UV light and provide a moisture reading.  Pet urine never dries.
Once you locate the source of the urine, you can use either Pounce the remaining three chemicals to remove the contaimination.
To use Knock out, remove the yellow metering tip on your injection sprayer so it will spray 1 to 4.  Place the Knock Out in a dedicated injection sprayer jug.  Heavily spray urine soaked area so as to puddle up the Knock Out on the carpet.  Apply any traffic lane prespray arround the urine soak area and not on top of the Knock Out.  Scrub or rake/groom carpet as need to get the carpet clean.  Allow at least a 15 min dwel time.  Rinse carpet with you normal formulated carpet rinse extraction cleaner (like Flush).  Post apply the Dual Action from you injection sprayer from a dedicated injection sprayer jug.  Saturate area and then only vacuum excess water from contamination just before you leave the job site and allow product to dry in carpet.