Mytee C347 Ametek 6.6" vacuum motor 1 stage 14 amp
- Mytee only sells this model as a replacement for EXISTING MACHINES ONLY.
- NO RETROFITS, OR AFTER MARKET SALES ALLOWED BY FACTORY.
- Model and Serial number required or MFG will cancel order.
*** Add the Model and Serial number of the machine you are repairing to the
comments page at time of check out ***
This is a drop in replacement for the old 116103 7.2" model with the same exact mounting but will have a way more increased performance for a little more amps.
140" water lift one vacuum motor
204" Water lift @ Sea Level /15"HG two vacuum motors in series (46% improvement)
3 motors in series 233.5" water (17" HG)
17.5 Amp Open flow / 10 Amp Sealed = Average 13.75 with 100 ft of hose and wand on the carpet (per motor)
120 Volts
Longer bearing and carbon brush life.
This motor is becoming recognized as 43 % better
performance replacement for the old 116103-00 7.2" vac motors.
Currently, they are being used in
Mytee LX Carpet Extractors. with (2) 6.6" motors.
More water lift at the carpet. Mytee’s new Hybrid Vacuum Motor outperforms where it matters most.
Water lift is measured with a gauge with the airline sealed. But sealed air doesn’t clean- most vacuums are designed to work at a 3/4” to 7/8” orifice. That is approximately the opening of a wand slot. We want to measure than the water lift at the carpet, not at the machine. To accomplish this, Mytee put a vacuum gauge on the wand head to measure the water lift at the carpet. Mytee’s revolutionary new hybrid vacuum motor has an increase of almost 30% at an unbelievable lift at the carpet of 113”. While base specifications may seem lower, the in-use specifications are in reality much higher than those of comparable motors. This high efficiency is due to the unique winding of the motor and special fan configuration.
Specifications on single vacuum motor:
- 171.6 CFM at 2″ orifice @ zero inches of lift
- 147″ base water lift @ zero cfm
- 113″ water lift when sealed with hose and carpet cleaning wand
- 13.75 Average amp draw
- 6.6 diameter
Specifications for two motors in air series:
- 225 CFM (SteamBrite test 216 CFM)
- 200″ base water lift @ zero CFM
- 113″ water lift at the carpet – 20% more efficient than any other vacuum motor in its class
- 13.75 Average amp draw per cord
Sales are final on all electrical components, including but not limited to, vacuum motors, pumps, and heaters.
Tab Mounting,Thermal Protection Manual,Insulation Class A,Ball Bearings,Ambient Temperature 40 Degrees C,Body Dia. 8.4 In.,Overall Height 7 In.,Mounting Brackets Aluminum,Intermittent Duty,Average Life 1500 hr.,Nominal Efficiency 45 Percent
Standards : UL Recognized E47185
Compare to current or past OEM associations:
Esteam Part number 355-150
AV20
Lamb 122475-00
Lamb 122628-00
Sales tax collected in CA and TX.
Optional
Ametek Lamb 122628-00 Lamb 6.6 Inch Vacuum Motor Blower 120 volts LX Tangential 1 Stage 1 Speed Mytee C347 [C347] Steambrite's Vacuum Motors - Ametek Lamb 122628-00 Lamb 6.6 Inch Vacuum Motor Blower 120 volts LX Tangential 1 Stage 1 Speed Mytee C347 [C347] is .
If you can find a lower advertised price on the Ametek Lamb 122628-00 Lamb 6.6 Inch Vacuum Motor Blower 120 volts LX Tangential 1 Stage 1 Speed Mytee C347 [C347] - C347,contact us at 210-662-9000, and we will beat their price! Guaranteed!
mini dehumidifier cleaning computer equipment N/A dehumidifier repair santa fe dehumidifier air duct cleaning service automotive carpet extractor
phoenix friedrich dehumidifier N/A carpet cleaning equipment truckmount car cleaning equipment carpet extractor
used dry cleaning equipment N/A cleaning supply and equipment car steam cleaning equipment N/A house cleaning equipment used truck mount carpet cleaning equipment
house cleaning equipment cleaning hospital equipment rotobrush cleaning equipment lease mississauga air duct cleaning swimming pool cleaning equipment N/A rx20 hydramaster N/A furnace air duct cleaning wholesale carpet cleaning supply
Product Options |
Shipping Surcharges: |
|
|