Cool Cuff 2in Starter Cuff for 2in Intake - Ah45 - Hose Cuffs & Connectors

Cool Cuff: 2in Starter Cuff for 2in intake [AH45]

Click to enlarge

Your Price: $9.75
Part Number: AH45
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 8.00

Easy to use - A simple 1/4 turn and it's connected. The latch locks it shut.
Can't separate - Go up stairs, around corners, around the reel. It won't come apart.
Durable - Rugged polypropylene (not vinyl), holds up to years of abuse.
Looks Cool - It's only about half the length, it's ergonomic, and the ends are tapered.
Inexpensive - Costs less than what it replaces: cuffs, barb & strap.
Long lived - Easily outlasts the other connectors you've used.
Compatible - Threads right onto your vac hoses just like your regular cuffs did.
Versatile - The original locking cuff system. Seals, locks & swivels. Patented.
Interchangeable - Reduces from 2" to 1 1/2 " with swivel or lock. Your choice.

See Brochure

Cool Cuffs™ are the black cuffs, the patented two-part locking System of connectors that replace all your existing vinyl cuffs. You no longer need a barb in between two vinyl cuffs.
- Each hose gets one set of Cool Cuffs (one male and one female).
Be sure to get enough sets for all of your vacuum hoses because they don’t work with vinyl cuffs.
- Follow the Fireman’s Rule: MALES POINT TOWARDS THE FIRE (Job).
This Rule applies all the way down the line, even to the Hydro Filter™.
Ask your supplier about the CoolFilter™ for increased air flow.
- The 2” Starter cuff goes onto your intake port. If you have a barbed intake port, then use a heat gun to soften the back end of the Starter cuff so it slides on easily.
Or you can grind the barbs down on your intake then tap on the Starter with a rubber mallet.
Clamp the Starter in place. At the beginning of every job, you will strip off vac hoses for the job and hook up to this Starter cuff. It’s your first MALE pointing towards the job.
- The Male that Swivels is the last male, normally used as a wand cuff for the 2” wand.
- The Reducer Female will let you step down to your 1 ½” lead hose or (whip hose). Screw it onto the Male Swivel at the end of your last 2” hose. Or you can go directly from 2” hose to 1 ½” hose by installing the Insert into the small end of the Reducer Female part. Now you have a swiveling reducer for all your 1 ½” tools. Note the Insert is reverse threaded. You might purchase an extra Reducer+Insert because they are easy to leave on the job.
TIPS ON CARING FOR YOUR COOL CUFFS:
- If you use the Latched Females, then squirt a few drops of oil onto this brass latch periodically. If you lose a brass latch, you can purchase replacements from your supplier.
- If you use the Swivel Females, squirt the knurled knob portion with WD-40 periodically.
You want the oil to seep down inside the two interlocking parts of the Female Swivel to where the o-ring is. Do not attempt to dissemble the two interlocking parts.
If your Swivel Females come unscrewed too easily, wrap electrical tape around the acme threads portion of the Male. One revolution wrapped clockwise is all it takes to build up the Male so it grabs the inside of the Female better. Some users are into their fourth year with this tip.
If grit gets embedded inside the two interlocking parts of the Swivel Female, you may find it helpful to soak them in warm soapy water and twist the parts back & forth several times to help release the grit. Some guys use air compressors.
WARRANTY:
If any of your Cool Cuffs crack, you can take them back to your supplier or call the manufacturer for free replacements.
If your swivels stop swiveling smoothly while under warranty and you’ve tried all the Tips:
- lubricating the o-ring inside the Female,
- wrapping the Male with electrical tape, and
- soaking the Female to release grit,

Steambrite will ship the Cool Cuff: 2in Starter Cuff for 2in intake [AH45] by either Fedex or Freight Quote, and will normally be shipped within 2-5 working days. Equipment small enough to be sent by Fedex should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.

This product was added to our store on Tuesday 08 April, 2008.

Customers who bought this also bought:

Faucet Adapter 13/16s to Garden Hose Connection	Cool Cuff: 2 Inch Swivel Cool Cuff Set	Hypro: Repair Kit for BPR Valve
Hydroforce: Flash Cuff - 2.0in Male Cuff	Gauge: 2000psi Panel Mount	Claber: Koala 8583 Indoor Faucet to Garden Hose Connector

AH45 for only $9.75 - Steambrite's price on the Hose Cuffs & Connectors - AH45 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,