“As good, if not better, than any other LGR high-temperature dehumidifier on the market…” – Kurt Bolden, Hydro Lab The powerful AQUATRAP AT450S All-Temperature, portable LGR Dehumidifier from Abatement Technologies® delivers unsurpassed structural drying power for large-scale commercial water restoration projects. The stainless steel AT450S has the capacity to remove 170 pints per day at AHAM, with performance optimized at 95° F. But what really sets the real-life performance of this LGR dehumidifier apart from the competition is its ability to outperform under a wide range of jobsite conditions. As a result, your crews can efficiently remove water at high temperatures (up to 125° F), at low temperatures (33° F), and everywhere in between! Superior dehumidification performance features of the AQUATRAP AT450S LGR Dehumidifier include: 170 pints/day water removal @ AHAM and up to 300 pints/day @ saturation Powerful 450 CFM airflow Exceptional grain depression 33° F to 125° F operating range Performance optimized @ 95° F Unique automated heat pump defrost technology Industry-Leading Heat Pump Technology for Faster, More Effective Large-Scale Structural Drying at Both High Temperatures and Low Temperatures State-of-the-art heat pump technology provides the AT450S High-Performance LGR Dehumidifier with its unique ability to operate efficiently in all types of drying environments. This technology enables the AT450S to defrost only when needed, and to remove water even in defrost mode. Superior “Beyond Bypass” Technology Systems utilizing “bypass” technology must slow down airflow (cfm) by up to 50% as the air is cooled moving across the evaporator to condense water. Not so with the AQUATRAP AT450S that utilizes heat pump technology! The AT450S provides a constant 450 cfm airflow – especially in hot conditions above 100° F – keeping work crews productive and structures drying faster. Easy-to-Operate Automated user controls make using the AT450S a snap. Simply set it up and let it do the work. Additional ease-of-use features include a protected bottom drain that removes residual water from the unit and protects the internal pump from cracking when operating or storing in freezing temperatures. Built-In Dolly with Adjustable Handle and Inboard Rear Wheels The built-in dolly includes a secure, adjustable handle for easier movement around the job site and helps protect the control panel in the lower position. The lower handle position allows efficient two-high stacking, warehouse storage and transport in a vehicle. Inboard rear wheels are attached to the unit in a protected wheel well close to the body for better maneuverability and tighter storage. Protected Bottom Drain A bottom drain mounted in a protected wheel well allows residual water to drain out of the unit and helps prevent internal pump or case cracking at freezing temperatures. The AQUATRAP AT450S LGR Dehumidifier has been tested by Environmental Testing Laboratories (ETL), a Nationally Recognized Testing Laboratory (NRTL), and carries the ETL (U.S.) and ETLC (Canada) marks certifying that it complies with applicable OSHA and CSA electrical safety standards. Specs Water Removal Rate - 170 ppd @ AHAM. 300 ppd @ saturation Airflow - 450 CFM Temperature Operating Range - 33° F to 125° F. Tuned to optimize performance @ 95° F Net Weight - 145 pounds Dimensions (D x W x H) - 24.25” D x 20.5” W x 40.0” H Shipping weight-179#s with pallet Shipping dimensions: 32" X 32" X 50" ships class 200 Power Supply Requirements - 115 VAC Peak Operating Current - 12 A Electrical Safety - ETL-certified for the U.S. & Canada Motor/Blower - High-efficiency, backward curved motorized impeller Controls - Off/On rocker switch, purge switch, defrost lamp, digital operating hour meter Cabinet Material - 20 gauge stainless steel construction Built-in Dolly - Two-wheel dolly with rear wheels and a secure top handle for easy movement and control Filter - MERV 8 pleated media, UL Listed Duct Options- Intake: fits 10” collar (included) for 10" flex-duct. Outlet: fits 10" collar (included) for flex-duct or 12" lay-flat duct Flexible Ducting Options The 10” collar for the top-mounted air intake on the AQUATRAP AT450S can accommodate 10” flex-duct (collar shown). The side-mounted air outlet directs low-grain exhaust out and fits a 10” collar for either 10” flex-duct or 12” lay-flat duct (collar shown). Intuitive Control Panel The straightforward design of the control panel makes the AT450S easy to set-up and operate. Control Panel Features: Durable Off/On rocker switch Automatic defrost lamp indicator Digital hour meter Pump purge switch Brochure
The powerful AQUATRAP AT450S All-Temperature, portable LGR Dehumidifier from Abatement Technologies® delivers unsurpassed structural drying power for large-scale commercial water restoration projects. The stainless steel AT450S has the capacity to remove 170 pints per day at AHAM, with performance optimized at 95° F. But what really sets the real-life performance of this LGR dehumidifier apart from the competition is its ability to outperform under a wide range of jobsite conditions. As a result, your crews can efficiently remove water at high temperatures (up to 125° F), at low temperatures (33° F), and everywhere in between!
Superior dehumidification performance features of the AQUATRAP AT450S LGR Dehumidifier include:
State-of-the-art heat pump technology provides the AT450S High-Performance LGR Dehumidifier with its unique ability to operate efficiently in all types of drying environments. This technology enables the AT450S to defrost only when needed, and to remove water even in defrost mode.
Systems utilizing “bypass” technology must slow down airflow (cfm) by up to 50% as the air is cooled moving across the evaporator to condense water. Not so with the AQUATRAP AT450S that utilizes heat pump technology! The AT450S provides a constant 450 cfm airflow – especially in hot conditions above 100° F – keeping work crews productive and structures drying faster.
Automated user controls make using the AT450S a snap. Simply set it up and let it do the work. Additional ease-of-use features include a protected bottom drain that removes residual water from the unit and protects the internal pump from cracking when operating or storing in freezing temperatures.
The built-in dolly includes a secure, adjustable handle for easier movement around the job site and helps protect the control panel in the lower position. The lower handle position allows efficient two-high stacking, warehouse storage and transport in a vehicle. Inboard rear wheels are attached to the unit in a protected wheel well close to the body for better maneuverability and tighter storage.
A bottom drain mounted in a protected wheel well allows residual water to drain out of the unit and helps prevent internal pump or case cracking at freezing temperatures.
The 10” collar for the top-mounted air intake on the AQUATRAP AT450S can accommodate 10” flex-duct (collar shown). The side-mounted air outlet directs low-grain exhaust out and fits a 10” collar for either 10” flex-duct or 12” lay-flat duct (collar shown).
The straightforward design of the control panel makes the AT450S easy to set-up and operate.
Control Panel Features:
